PDA

View Full Version : 1000 km du Charleroi (DAVIC)


Fola. AKA Ché G.
06-06-2009, 07:56 AM
Guys... this is real Slotracing.... count the cars on the track........

http://lh6.ggpht.com/_PvLDsC2pRvk/SiOW64TnPVI/AAAAAAAAFV8/XOo9Uj-je6U/s720/P1010460.JPG

Springbok Racer
06-06-2009, 09:21 AM
Fola

You must be joking, right...........:confused:

Cheers

Jan

Fola. AKA Ché G.
06-06-2009, 12:07 PM
Fola

You must be joking, right...........:confused:

Cheers

Jan

No Joke... thats for real.....15 drivers on 6 lanes 7.5 hours NON STOP!!!
:autofahrer[1]::autofahrer[1]::autofahrer[1]::autofahrer[1]::autofahrer[1]::autofahrer[1]:

Fola. AKA Ché G.
06-06-2009, 01:26 PM
Davic is real slot racing.... seeing is believing!

Tamar invited me to race with RFH, iI thought ok cool, something new to race,
and all I must do is RACE!.
I bought my self a Gr C BRM body, similar to the one that Tamar was to build for the
race, It was intended to be a "Test" car, and a car to test the Chassis that was to be
built for the car being made by Tamar.

Tamars car never saw the track because it was never finished due to the fact that he broke
his shoulder and could not complete the build....

Started my build as I always do, and one thing lead to another, and as always happens, too much
detail research and I exaggerated and took on more modifications that initially planned.

http://lh6.ggpht.com/_PvLDsC2pRvk/SgdqSYWRBAI/AAAAAAAAEXU/nf76NuBYD38/2720765810_6280073018.jpg

Made a short tail out of the long Tail, Painted the roof black as it raced in..XXXX.. ,
Rebuilt the side panels, made a scale interior, addedlots of P.E parts, made a diffuser ,
Rubber spoiler holders, 0,3mm plastic Spoiler... the whole nine ;-)

http://lh3.ggpht.com/_PvLDsC2pRvk/Sgdqdk7NC1I/AAAAAAAAEYg/ox0eGsR8qyk/s640/DSC01201.jpg

http://lh5.ggpht.com/_PvLDsC2pRvk/ShwirTazG6I/AAAAAAAAFII/msQl-e2IxJ8/s640/DSC01328.jpg

http://lh3.ggpht.com/_PvLDsC2pRvk/Shzo7S_59zI/AAAAAAAAFJk/eCibG75NrDI/s640/DSC01339.jpg

http://lh4.ggpht.com/_PvLDsC2pRvk/ShzpVvMJ9EI/AAAAAAAAFMU/F-LlyhWe5EI/s640/DSC01382.jpg

http://lh5.ggpht.com/_PvLDsC2pRvk/ShzpUOeQKzI/AAAAAAAAFMI/5ijU7NPij3Q/s640/DSC01379.jpg

http://lh6.ggpht.com/_PvLDsC2pRvk/Sh31nuyiKdI/AAAAAAAAFM0/kxrHbROuC5U/s640/DSC01391.JPG

The car that was meant to be a Test car was looking like a concour winner!

http://lh4.ggpht.com/_PvLDsC2pRvk/ShwiscZujVI/AAAAAAAAFIQ/4q-TYiQ13-k/s512/DSC01330.jpg

The Chassis.... Basis was the new Plafit 1700g, i added carbon body holders, h plate and T bar,
I made a fitting weight kit, added a Red fox guide that i modded for the Carrera track used my
copper tape instead of wires for the power transfer, T Hülsen where possible, Torx screws and
all possible goodies.

The car was 85%ready 2 day before leaving for Belgium, was 2 10ths faster than my c291 but 30g
too light.

In Belgium in the Hotel and at the track I managed to finish the car.... add weight, build spoiler and
holders add the chip.

http://lh4.ggpht.com/_PvLDsC2pRvk/SiOZjx3VySI/AAAAAAAAFZY/DlOdwNgLeAA/s640/P1010293.JPG

The "conversion" of the car was really easy - cut the motor cables, and plug the
Chip in between finished. Took 5 mins.

http://lh6.ggpht.com/_PvLDsC2pRvk/SiOZKaKhBYI/AAAAAAAAFYw/LV4c9vE2Tws/s720/P1010284.JPG

http://lh4.ggpht.com/_PvLDsC2pRvk/SiOZmz_JeoI/AAAAAAAAFZc/pR26bsDWtOU/s720/P1010294.JPG

http://lh6.ggpht.com/_PvLDsC2pRvk/SiOZzPECnCI/AAAAAAAAFZw/oZpxcSXuR2o/s720/P1010313.JPG

http://lh3.ggpht.com/_PvLDsC2pRvk/SiOaCOOvboI/AAAAAAAAFaI/SsZK93ROrFU/s720/P1010319.JPG

http://lh5.ggpht.com/_PvLDsC2pRvk/SiOaJzHCsZI/AAAAAAAAFaQ/_opOHVe_O_o/s720/P1010321.JPG

http://lh4.ggpht.com/_PvLDsC2pRvk/SiOZOK1oNRI/AAAAAAAAFY4/DZVnqTf7988/s720/P1010286.JPG

The controller is a different strory. You need a controller made for the system.
Willem built one for us that worked perfectly. Actually better than the one we had
borrowed for testing from Hubert the club owner.

The first tests runs with a standard BRM car lent to me by Hubert went well, I took the time to get
used to the layout, and then later started working on the lane changing.... that was not easy because
at certain points on the track you can only change one lane up or down....

Anyway the first tests went well, and I was just slightly slower than Hubert who was a favorite.
and around midnight we left the club so that i could finish the car in the Hotel.... was up till 4am ;-)

Finished 100% in time for the race, TC controll... the fronts were too small and i had to use super glue
to build them up.

http://lh4.ggpht.com/_PvLDsC2pRvk/SiOSQonWhEI/AAAAAAAAFQQ/9i9I4vxBiTk/s720/P1010349.JPG

http://lh4.ggpht.com/_PvLDsC2pRvk/SiOSyiNmYtI/AAAAAAAAFQ4/8jJx_iVQkio/s720/P1010358.JPG


Quali.... wow, 15 cars on 6 lanes.... whos the fastest? RFH featuring Slotfabrik!!
Driving this way is just fantastic, you don't just race... you have to think an plan too... when to overtake,
which lane is the fastest ? which lane has less traffic? which lane ´has more or less grip?
where can I change lanes?

http://lh3.ggpht.com/_PvLDsC2pRvk/SiOTQPA_SYI/AAAAAAAAFRY/U_B4UWUsIpo/s720/P1010366.JPG

http://lh4.ggpht.com/_PvLDsC2pRvk/SiOXXmSOo5I/AAAAAAAAFWg/uDrm1qYMsB0/s720/P1010476.JPG

http://lh3.ggpht.com/_PvLDsC2pRvk/SiOYdhNdbwI/AAAAAAAAFYA/2JgKh6xiNlc/s720/P1010502.JPG

http://lh5.ggpht.com/_PvLDsC2pRvk/SiOYw90G1iI/AAAAAAAAFYU/wODsc81IJ1E/s640/P1010507.JPG


We (I) were the quali fastest and chose to race on the 1st lane. The rest was a blast! we won with about 50
laps ;-) and the car was fast allthrough the race 7,5hrs, 2175 laps.

eec rnd 5 in Alsdorf was good... but this was The best race ever!

Thanks Hubert, Thanks Grek.....
:autofahrer[1]::autofahrer[1]:
:nice::nice:

lotus4ever
06-06-2009, 01:42 PM
Wow, that I must try sometime, when are the next race? And don't say July:bleh:

slotstormer
06-06-2009, 09:27 PM
Very nice work Fola, inspirational as always.:worshippy:

How was the racing was there not bumping and barging while racing?

Springbok Racer
06-07-2009, 10:17 AM
Well done Fola, glad to see you guys are starting to use the 1700G - very nice base plate for the S24/1700 series. Was that a Fox2 motor? We find them very reliable and if it was, I'm sure it lasted the 7.5 hours, no problem. What was the weight of the car?

Cheers

Jan

Fola. AKA Ché G.
06-07-2009, 09:40 PM
the Fox 2 handled the 190 car weight easily.... for the whole duration.....

Fola

Springbok Racer
06-08-2009, 08:07 AM
Mark,

Please read this reply from Fola. The Fox2 is such a good little motor and it's sealed, and it's cheap, and it's reliable, and they are very well matched ........... we've been using them now for 6 years ..............

Jan

PaulNZ
06-09-2009, 11:43 AM
Nice Car, great looking track.......Digital is great, I'd love to try a 1/24 digitalo car.

Hope to see more of this racing.